Custom Search

Wednesday, May 12, 2010

Play cricket in online with real feeling

Play cricket in online with real feeling

Online cricket game from Cricinfo - choose your team, your opponents, the venue and off you go.

http://slogout. cricinfo.com

Take a look at everything in our Pavilion including Ashes fixtures, npower girls

Twenty20 cricket, npower Village Cup and videos!


http://cricket.npower.com

Play free online flash games. Includes action games, dress up games, board, card games myspace games and more.

www.gamesjockey.com

Games2Win, top 20 online gaming businesses in the world, offers some of the best free online games for girls & boys including fun, car, fashion and dress

www.games2win.com


* www.flashcricket.com

* w ww.coverdrivecricket.com

*http://howzat.com

*www.games2win.com

*http://fantasy.cricinfo.com

*http://games.sify.com

Read more...

Car Steered with Driver’s Eyes

Car Steered with Driver’s Eyes

Source: Christian Kielmann"> The vehicle is controlled solely by the eye movements of the  driver.
The vehicle is controlled solely by the eye movements of the driver.
Source: Christian Kielmann
Source: Christian Kielmann"> Cameras mounted on the helmet  capture the eye movements of the  driver, which are converted into control signals for the steering  wheel.
Cameras mounted on the helmet capture the eye movements of the driver, which are converted into control signals for the steering wheel.
Source: Christian Kielmann
Source: Christian Kielmann"> Raul Rojas is a professor of artificial intelligence in the  Department of Computer Science at Freie Universität Berlin.
Raul Rojas is a professor of artificial intelligence in the Department of Computer Science at Freie Universität Berlin.
Source: Christian Kielmann
Source: Christian Kielmann"> In the AutoNOMOS project Prof. Rojas and his team are working on  the further development of autonomous and semi-autonomous cars.
In the AutoNOMOS project Prof. Rojas and his team are working on the further development of autonomous and semi-autonomous cars.
Source: Christian Kielmann
Source: Christian Kielmann"> Over 60 journalists from around the world attended the press  screening.
Over 60 journalists from around the world attended the press screening.
Source: Christian Kielmann

Demonstration by Computer Scientists of Freie Universität at Former Tempelhof Airport

“Keep your eyes on the road!” – Today scientists at Freie Universität working under the computer science professor Raúl Rojas gave a completely new meaning to this standard rule for drivers: Using software they developed, they can steer a car with their eyes. Today on the site of the former Berlin Tempelhof Airport, the head of the project, Raul Rojas, and his team from the Artificial Intelligence Group demonstrated how they can steer the vehicle that is equipped with complex electronics just by eye. More than 60 journalists from around the world were there to watch. A video, photos, and other information can be viewed in the online magazine of Freie Universität, campus.leben.

Information about the Software: EyeDrive

The eyeDriver software is a prototype application for steering the research vehicle Spirit of Berlin using eye movements. The software was designed by computer scientists at Freie Universität Berlin in collaboration with the company, SMI (SensoMotoric Instruments). The eye movements of the driver are collected and converted into control signals for the steering wheel. The speed is controlled separately and is not included in eyeDriver. The software shows that you can drive a vehicle solely with eye movements.

The HED4 solution by SMI is used for detecting and tracking the eye movements. It is a converted bicycle helmet equipped with two cameras and an infrared LED, as well as a laptop computer with special software. One of the cameras is pointed to the front in the same direction as the person wearing the helmet (scene camera), while the other camera films one eye of the wearer (eye camera). The infrared light supports the eye camera and is pointed to the eye under observation. A transparent mirror that reflects only the infrared light is used to allow a reasonable viewing angle for the eye camera, without limiting the wearer’s ability to see.

After a brief calibration the software on the laptop of the HED4 is not only able to capture the position of the pupil in the eye camera, but can also calculate the position in the scene camera that the wearer is looking at. These coordinates in the image of the scene camera (viewing position) are transmitted via an ordinary LAN to the onboard computer in the Spirit of Berlin.

The eyeDriver software in the onboard computer in the Spirit of Berlin receives the viewing positions at regular intervals over the LAN in the vehicle and uses it to control the steering wheel. The driver can choose between two modes: “free ride” and “routing.”

In the “free ride” mode the viewing positions are linked directly with the steering wheel motor. That means that the x-coordinates of the viewing position are used to calculate the desired position of the steering wheel. The further the driver looks to the left or right, the further the steering wheel is turned in that direction. The speed of the vehicle is set in advance and kept constant, as long as the position of the gaze is recognized. In case it is not possible to detect which direction the driver is looking in, for example, if the driver’s eyes are closed, the vehicle brakes automatically.

In the “routing” mode, the Spirit of Berlin steers autonomously most of the time. Only where there is a fork in the road, or an intersection, the car stops and asks the driver to select the next route. This requires the wearer of the helmet to look to the left or right for three seconds. If the driver’s gaze lingers long enough in one direction, the eyeDriver software confirms acoustically that the choice has been accepted. The decision is communicated to the planner in the vehicle. Then the artificial intelligence in the Spirit of Berlin can plan the route accordingly and continue to run independently.

For more information :

www.fu-berlin.de/en/presse/fup/2010/fup_10_106/index.html,

www.youtube.com/watch?v=0zbrySJVQ5A



Read more...

Passenger Elevator Trick !

Passenger Elevator Trick !


This is usefull for those who often use elevators !


When we press the floor no. button on the panel lift start moving. But if someone on the next floor calls the lift the lift stop for them, this could be very irritating in rush hours !


Now, if you Press the Floor No. Button and the Close Door Button both at same time then the elevator would not stop for any one in the way and will stop directly on the destination floor !


** Note in some elevator systems this trick might not work !

Read more...

LOCK YOUR FOLDERS


LOCK YOUR FOLDERS



You can lock and unlock your folder with this simple trick !


Procedure :
1. Make a folder on the desktop and name it as "folder"



2. Now, open notepad and write ren folder folder.{21EC2020-3AEA-1069-A2DD-08002B30309D} and now (Notepad Menu) File>save as.


3. In the 'save as' name it as lock.bat and click save ! (Save it on Desktop)


4. Now, again open notepad again and write ren folder.{21EC2020-3AEA-1069-A2DD-08002B30309D} folder and now (Notepad Menu) File>save as.


5. In the 'save as' name it as key.bat and click save ! (Save it on Desktop)


6. Now, double click lock.bat to lock the folder and now if you open your folder, control panel will open up !


7. Now, double click key.bat to open the folder and now if you open your folder, you can access your data inside the folder again !


8. Lock your folder and hide the key.bat somewhere else on your hard disk !


9. Whenever you want to open your folder just paste the key.bat on desktop and open your folder using it !

Simple !

Read more...

Download Free Cell Phone Videos (3GP) With Google

Download Free Cell Phone Videos (3GP) With Google

Do you want to download a bunch of free videos for your cellular phone? This technique will show you how to search Google to find tons of open directories containing free cell phone videos. No P2P or torrents required. Start your collection from the open collections of others.

This time we will be using a Google search to find people’s open directories of 3GP videos. This is a common video format used to view videos on cell phones.
1. Open Directories of 3GP files:
Google: -inurl:htm -inurl:html -inurl:asp intitle:”index of” 3gp
2. Specific Searches for 3GP files:
Google: filetype:3gp inurl:3gp
Now this search is not nearly as sexy as it brings in a ton of junk. However, this search casts your net wider. The magic here is the filetype and inurl filters telling google to only include these video files in your search. By leaving these filters in place, you can add more search terms to narrow your search.
For example, to search 3GP video files that are associated with rock.
Google: filetype:3gp inurl:3gp rock

Read more...

Add “Hide File Names” Option in “View” Menu in Windows Vista

Add “Hide File Names” Option in “View” Menu in Windows Vista

Guys with this 4 simple steps you can add Hide File Names Option in View Menu in your widows Vista...... this trick works only with Windows Vista.

1. Open a folder, in which you want to add this option. If you want to add this option in all folders, then open the parent folder. e.g. if you want to add the option in every folder of E: drive, then open E: drive.

2. Right-click on a blank area in the folder and select “Customize This Folder". You can also get this option from “View -> Customize This Folder.

3. It’ll open “Customize” tab. Now select “Pictures and Videos” option from “Template” drop-down box.
NOTE: If you want to add the option “Hide File Names” to a particular folder then make sure to un-check the option “Also apply this template to all subfolders“, otherwise enable this option.

4. Now Apply it and see the magic.
Now you’ll get an extra option “Hide File Names” in “View“. Which can hide file/folder names in that particular folder.Actually in Windows XP we can hide file/folder names by pressing key and selecting “View -> Thumbnails“. Since they hv removed “Thumbnails” option from “View” menu, I think thats why this option was added to folders having their templates as “Pictures and Videos”.

Read more...

Create a drive menu for My Computer

Create a drive menu for My Computer

Set My Computer to work like a menu for easier access to the drives you need.
By default, the My Computer item on the Start menu is configured to work like a standard folder window. If you need to access a specific drive, select My Computer from the Start menu, wait a moment for the window to appear, and then double-click the icon for the drive you need to access.
When you're in a hurry, this two-step procedure can be time-consuming and frustrating—especially if My Computer contains a large number of drive icons. However, Windows XP makes it easy for you to configure My Computer so it works like a menu, with each drive listed as a menu item.

Here's how.
1. click the Start button, and select Properties.
2. Click Customize, which is adjacent to the Start Menu radio button, and select Advanced.
3. Scroll through the Start Menu Items list box until you see My Computer.
4. Select Display As A Menu, and click OK twice.Now, when you select My Computer from the Start menu, you'll see a menu of individual drives. To access the contents of that drive, just select the drive letter from the menu.

Read more...

Add your own SideBar In Windows Xp !

Add your own SideBar In Windows Xp !

..Using Windows Xp ? Need a look similar to Vista ? need a sidebar which contains feeds about your favourite site , then you are in right place ..! We use a software called MediaTicker , an product from RoXio's to create your own sidebar . Your Sidebar will look similar to this ....!!


Follow these simple steps :
Download & Install this S/w: http://docs.sonic.com/labs/mediaTicker/roxiomediaticker21.exe

Now Open the software installed . It will automatically create a Sidebar for you .

Now to edit this sidebar , click options on the roxio sidebar . You will see this !

In the URL add the Feed of your favourite site . Now you Sidebar shows the Feeds from your favourite site , as indicated in the Sidebar above, which makes you not to visit the site , instead you can add in your desktop itself ...! You can place the sidebar anywhere in the desktop , by selecting the options !

Apart from the Favourite sites , You can also add your Favourite Pictures From your Pc as sidebar , which makes you to feel good ..!
Thats it your sidebar has been created and the look of your desktop will look like the Vista.


Read more...

How to use the Google calculator

How to use the Google calculator


Google’s calculator tries to understand the problem you are attempting to solve without requiring you to use special syntax. However, it may be helpful to know the most direct way to pose a question to get the best results. Listed below are a few suggestions for the most common type of expressions (and a few more esoteric ones).
Most operators come between the two numbers they combine, such as the plus sign in the expression 1+1.
Operator Function Example + addition 3+44 - subtraction 13-5* multiplication 7*8/ division 12/3^ exponentiation (raise to a power of) 8^2% modulo (finds the remainder after division) 8%7choose X choose Y determines the number of ways of choosing a set of Y elements from a set of X elements 18 choose 4 th root of calculates the nth root of a number 5th root of 32 % of X % of Y computes X percent of Y 20% of 150
Some operators work on only one number and should come before that number. In these cases, it often helps to put the number in parentheses.
Operator Function Example sqrt square root sqrt(9) sin, cos, etc. trigonometric functions (numbers are assumed to be radians) sin(pi/3)tan(45 degrees) ln logarithm base e ln(17) log logarithm base 10 log(1,000)
A few operators come after the number.
Operator Function Example ! factorial 5!
Other good things to know
You can force the calculator to try and evaluate an expression by putting an equals sign (=) after it. This only works if the expression is mathematically resolvable. For example, 1-800-555-1234= will return a result, but 1/0= will not.
Parentheses can be used to enclose the parts of your expression that you want evaluated first. For example, (1+2)*3 causes the addition to happen before the multiplication.
The in operator is used to specify what units you want used to express the answer. Put the word in followed by the name of a unit at the end of your expression. This works well for unit conversions such as: 5 kilometers in miles.
You can use hexadecimal, octal and binary numbers. Prefix hexadecimal numbers with 0x, octal numbers with 0o and binary numbers with 0b. For example: 0x7f + 0b10010101.
The calculator understands many different units, as well as many physical and mathematical constants. These can be used in your expression. Many of these constants and units have both long and short names. You can use either name in most cases. For example, km and kilometer both work, as do c and the speed of light.
Feel free to experiment with the calculator as not all of its capabilities are listed here. To get you started, we’ve included a few expressions linked to their results.
1 a.u./c56*781.21 GW / 88 mphe^(i pi)+1100 miles in kilometerssine(30 degrees)G*(6e24 kg)/(4000 miles)^20x7d3 in roman numerals0b1100101*0b1001
More info on:
http://www.google.co.in/help/calculator.html

Read more...

DIFFERENT WAYS TO SHUTDOWN YOUR PC

DIFFERENT WAYS TO SHUTDOWN YOUR PC

There are so many different ways to turn off your Windows XP computer, let's look at some of them:

1. The standard approach - click the Start Button with your mouse, then select the Turn Off menu and finally click the Turn Off icon on the Turn Off computer dialog. blink.gif

2. Press Ctrl+Esc key or the Win key and press u two times - the fastest approach.

3. Get the Shutdown utility from Download.com - it add the shut down shortcuts for you. Else create them yourself using approach 4.

4. Create a shutdown shortcut on your desktop. Right click on the desktop, choose New Shortcut and type shutdown -s -t 00 in the area where you are asked to specify the location of the program file. Now you can just double click this icon to turn off the computer. The best location would be your quick launch bar.

5. Press the Win key + R key to open the run window. Type shutdown -s -t 00. [s means shutdown while t means the duration after which you want to initiate the shutdown process].

If some open processes or application won't let you turn off, append a -f switch to force a shut down by closing all active processes.

6. Win+M to minimize all windows and then Alt+F4 to bring the Turn Off computer dialog.

7. Open Windows Task manager (by right clicking the Windows Task bar or Alt+Ctrl+Del) and choose Shut down from the menu. Useful when the Windows are not responding.

8. open task manager--->click on shutdown--->hold the ctrl key and click on Turn off::::::: pc will be turned off in 3 secs.. fastest method other than hard shutdown

Read more...

Change / Add Restrictions

Change / Add Restrictions

1.Open RegEdit


2.Go to HKEY_CURRENT_USER\Software\Microsoft\Cur

rentVersion\Policies

3.Go to the Explorer Key

4.Then right click on the right side pane and select "Create Dword".

Select appropriate value name from the list given below and enter 1 for enabling the value and 0 for disabling it

NoDeletePrinter - Disables Deletion of Printers

NoAddPrinter - Disables Addition of Printers

NoRun - Disables Run Command

NoSetFolders - Removes Folders from Settings on Start Menu

NoSetTaskbar - Removes Taskbar from Settings on Start Menu

NoFind - Removes the Find Command

NoDrives - Hides Drives in My Computers

NoNetHood - Hides the Network Neighborhood

NoDesktop - Hides all icons on the Desktop

NoClose - Disables Shutdown

NoSaveSettings - Don't save settings on exit

DisableRegistryTools - Disable Registry Editing Tools

NoRecentDocsMenu - Hides the Documents shortcut at the Start button

NoRecentDocsHistory- Clears history of Documents

NoFileMenu _ Hides the Files Menu in Explorer

NoActiveDesktop - No Active Desktop

NoActiveDesktopChanges- No changes allowed

NoInternetIcon - No Internet Explorer Icon on the Desktop

NoFavoritesMenu - Hides the Favorites menu

NoChangeStartMenu _ Disables changes to the Start Menu

NoFolderOptions _ Hides the Folder Options in the Explorer

ClearRecentDocsOnExit - Empty the recent Docs folder on reboot

NoLogoff - Hides the Log Off .... in the Start Menu.

Read more...

Creating Compurter Restore point and taking backup

Creating Compurter Restore point and taking backup

By this tweak you can restore your computer without formatting or reinstalling new OS

Creating Computer Restore Point
1. Start -> Run ->type %SystemRoot%\system32\restore\rstrui.exe, and then click OK.

2. On the Welcome to System Restore page, click Create a restore point -> Next .

3. On the Create a Restore Point page, type a name for the restore point and -> Create

4. After the restore point has been created, click Close.

Backup utility

1. Click Start -> Run -> type ntbackup.exe, and then click OK.

2. On the "Welcome to the Backup and Restore Wizard" page, click Advanced Mode.

3. Click the Backup tab.

4. On the Job menu, click New.

5. Click to select the check boxes for the drives that you want to back up. If you want to be more specific in your selections, expand the drive that you want, and then click to select the check boxes for the files or for the folders that you want.

6. Click to select the System State check box.

Read more...

Start computer in 10 seconds

Start computer in 10 seconds

Right heres what u have to do to turn ur pc on in 10 seconds :



Click on the start button then press R it will take u to Run well go to runand type Regedit
press enter
this will open Registery Editor
now look for the key

HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex


now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer
You'll See The Result

Read more...

Powering on the Computer With Your Mouse

Powering on the Computer With Your Mouse

Here's the method by which you can start your computer by clicking your mouse button.

If you have ATX Main Board, ATX case Award Bios, or any Bios that supports PS/2 Mouse Power On, then you can power on your computer with a double click.

To activate this feature:

Restart your computer

Then press Del when the BIOS message appears to enter your CMOS configuration Select Integrated Peripherals from main menu
If PS/2 mouse power on disabled, activate it by press page up/ page down key it will became Double-Click
Press Esc key to exit
Press F10 to save and exit Power off your PC
Now double-click the left mouse button,.. Your PC will turn on

Read more...

Increasing XP shutdown speed

Increasing XP shutdown speed

Generally windows takes time to start and also it takes time to shutdown. I have already posted the method of increasing shutdown speed of computer. But, this is the easy way to fasten the shutdown speed.

Increasing shutdown speed by reducing wait times:
Windows XP stores a couple of values in its registry which are responsible for determining how long to wait before shutting down (killing) open applications and services once the shutdown command has been given.
By editing these two settings and changing them to lower values, you can considerably decrease the amount of time that Windows XP needs to successfully shut itself down. The first part of this tweak deals with setting the amount of time Windows will take to kill open applications on shutdown.
Open REGEDIT and navigate to 'HKEY_CURRENT_USER\Control Panel\Desktop\'
Highlight the 'WaitToKillAppTimeout' value.
Set it to '1000' (the default should be 20000).
Now highlight the 'HungAppTimeout' value
Set it to '1000' also.

Read more...

Add Safe Mode to Boot menu.

Add Safe Mode to Boot menu.

Safe Mode is most commonly used for troubleshooting purposes. If you find yourself booting to safe mode often. You may find it helpful to include the option for safe mode in your boot menu. Below, is a method you can use to save yourself from having to press F8 during startup to access Safe Mode:

-Right click My Computer and click Properties.
-Click the Advanced tab.
-Under Start Up and Recovery, click the Settings button.
-Click Edit. The boot.ini file will open in Notepad.


-Copy the line that reads as follows: multi(0)disk(0)rdisk(0)partition(2)\WIND

OWS=”Microsoft Windows XP Professional” /fastdetect.

Paste the line you just copied after the original one.
Change the copied line from “Microsoft Windows XP Professional” to “Windows XP Safe Mode” or something similar.
At the end of this line add the following: /safeboot:minimal /sos /bootlog.
Save the boot.ini file by clicking File then Save.
Restart your computer and Safe Mode should be available at the boot menu.
Note: Your actual Boot.INI may vary to a small degree. The above is an example only. Be sure to copy your boot.ini file prior to making any changes to it.

Read more...

Make your PC shutdown at a time you wish.

Make your PC shutdown at a time you wish.


There are two methods to make your computer shutdown at a time you wish.

METHOD 1:

1. Right click on your desktop and choose "New=>shortcuts".
2. In the box that says "Type the location of the shortcut",
type in "shutdown -s -t 3600" without the quotation marks and click next. Note: 3600 are the amount of seconds before your computer shuts down. So , 60secs*60mins=3600secs.
3. Make up a name for the shortcut and you're done.
You can change the icon by right clicking=>properities=>change icon=>browse
TO ABORT:
To make an abort key to stop the shutdown timer just create another shortcut and make
the "location of the shortcut" to " shutdown -a" without the quotes.

METHOD 2:
Here is another trick to shutdown at a specific time, for example you wish to shutdown at 11:35am. Type this in
start=>Run
Type Code: at 11:35 shutdown -s
TO ABORT:
Code:shutdown -a

Read more...

Removing Multiple Boot Screens

Removing Multiple Boot Screens

If you are getting unwanted multiple boot screen
Then Follow these Steps.

1> Right Click on My Computer

2>Select Properties

3>Select Advanced Tab

4>Select Settings In the Startup & Recovery Section(3rd grp)

5>Select the operating system which u want.

6>And Click OK.

7>Further again press the setting and click on Edit.

8>It will open boot.ini File.

9>Now u can delete those o/s which you don't want to be displayed.

Note: For deleting operating systems from boot.ini file, keep it mind that you can't
delete that o/s which is selected by default there. Before
making any changes make a copy of boot.ini file.

Read more...

How to convert a FAT partition to NTFS.

How to convert a FAT partition to NTFS.

Here is the simplest method to convert a FAT partition to NTFS.

Click Start ->click Programs-> click Command Prompt.

In Windows XP, click Start, click Run, type cmd and then click OK.

At the command prompt, type CONVERT [driveletter]: /FS:NTFS.


Convert.exe will attempt to convert the partition to NTFS.


NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).

Read more...

Automatically run programs when starting Windows

Automatically run programs when starting Windows

If there are applications or commands that you run every single time you start your computer (Email comes to mind) you may want to consider setting things up so that these programs run automatically during the Windows XP startup. This can be done quite easily in XP by creating shortcuts and shuffling them around.

Here's how: Windows XP has a startup folder located at 'C:\ Documents and Settings\ (your user name)\ Start Menu\ Programs\Startup.' Shortcuts placed into this folder will be run automatically when Windows XP starts up.

If you already have shortcuts for the programs you desire to use, copy and paste them into the startup folder. Otherwise, go to 'start\programs,' select the program you would like to create a shortcut for, right click it and select 'send to' then 'desktop.' This will create a shortcut on the desktop that you can then use.

Read more...

How to set monitor refresh rate.

How to set monitor refresh rate.

Every monitor has a maximum refresh rate it is capable of displaying at a given resolution (for example, a typical 17-inch monitor of a few years ago will happily crank out 85Hz or more at a resolution of 800x600, but may only be capable of 60Hz at 1600x1200).

If this refresh rate is exceeded, the image will be distorted and unusable.

Older CRT monitors, especially 15-inch or smaller ones, tend not to be capable of a refresh rate much over 60Hz, especially at resolutions greater than 640X480. Also, setting the refresh rate does not have the same effect on LCD or flat panel monitors, as their screens are not redrawn in the same way.

To change your monitor refresh rate: Right click on an empty space on your desktop (no icons) and select 'properties.' Click the 'settings' tab and choose the 'advanced' button. Now choose the 'adaptor' tab and click the 'show all modes' button.

This presents you with a list of resolution, colour and refresh rate options that your video card\monitor combination is capable of displaying. You can experiment with these settings by using the 'apply' button. Note that a refresh rate of 75Hz or above is generally recommended, (keep in mind most monitors do not support settings higher than 85Hz).

After you set the refresh rate, you may feel a little uncomfortable for a short while as your eyes adjust, but rest assured you will grow to appreciate the difference in ease of viewing.

Read more...

Customise Your "Start" Button

Customise Your "Start" Button


First you need a tool called "Resource Hacker". This free program allows you to change resources in any .exe file such as "Explorer.exe", which includes the [Start] button's Label. You can visit Google.com and search there for "Resource Hacker".
After you download it, follow the guide here:

Step 1:

A - Run "Resource Hacker" and open the file "%windir%\Explorer.exe".
B - You see a Tree of all Resources in this file, expand the "String Table"
C - Find the "start" and replace it with your own text. then press the [Compile Script] button.
D - Save "Explorer.exe" as "MyStart.exe" DONT save it as Explorer.exe, do "save as.." and give it a new name.
E - Quit "Resource Hacker".

Step 2:

A - Click on the [Start] button and choose the "Run..." item from the start menu. (Or use the shortcut key WinKey+R)
B - Type "RegEdit" in the Run "Dialog Box". And then press the [Ok] buton to run the "Registry Editor" program.
C - Go to: "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\W
indowsNT\C urrentVersion\Winlogon" and find the "Shell" property.
D - Replace value of the "Shell" property to "MyStart.exe".
E - Quit "Registry Editor".
F - Restart your system.


Note about Registry Editor:
if you did not find the key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\W

indowsNT\C urrentVersion\Winlogon", you can search the Registry for the "Explorer.exe", to do this use the Edit Menu | Find Next (Ctrl+F).

Read more...

How to create a password reset disk

How to create a password reset disk

Here's an important tip… If you are using a password protected user account in Windows XP (and you really, really should be ) you might be nervous about forgetting your password. Well here's a way to put your mind at ease, at least a little bit. Windows XP allows users to create a password reset disk specific to their user account. This disk can be used at the welcome screen to reset your password in the event that you do forget it.

To create the disk: Go to start\control panel\user accounts. Select the account you are currently logged in as.

Under the 'related tasks' heading in the top left corner, click 'prevent a forgotten password' to open the forgotten password wizard. Insert a blank floppy disk and follow the instructions to create your password reset disk.

To use the password reset disk in case of emergency:

Once you have created a password reset disk for a specific user, the next time the password for that user is entered incorrectly at the welcome screen, a message will pop up asking if you have forgotten your password. At this point you can elect to use your password reset disk. Follow the instructions to reset your password.

Note: There are a couple of possible problems with the above procedure. For one, if you have used Windows XP's built in encryption feature to encrypt some of your files and folders, but have not yet updated to service pack 1, do not reset your password, as you will lose access to all the encrypted data. Once you have got service pack 1, it is safe to use the disk. Also, you cannot gain access to the reset feature if you have disabled the welcome screen on XP by using tip #31 above.

Keep your reset disk in a safe location, because anyone else can also use it to reset your password....

Read more...

you can maximize the battery life of your laptop

you can maximize the battery life of your laptop

Your New Notebook-- Be sure to fully charge your portable when you plug it in for the first time, and then run Software Update to ensure you have the latest software. Apple periodically releases updates that may improve battery performance.

Standard Maintenance

For proper maintenance of a lithium-based laptop battery, it’s important to keep the electrons in it moving occasionally. Apple does not recommend leaving your portable plugged in all the time. An ideal use would be a commuter who uses her MacBook Pro on the train, then plugs it in at the office to charge. This keeps the battery juices flowing. If on the other hand, you use a desktop computer at work, and save a notebook for infrequent travel, Apple recommends charging and discharging its battery at least once per month. Need a reminder? Add an event to your desktop’s iCal.

Long Term Storage

If you don’t plan on using your notebook for more than six months, Apple recommends that you remove and store the notebook battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life. Be sure to store the ejected battery at the proper temperature. (See “Notebook Temperate Zone.”)

Optimal Setting


You can choose to use your Apple notebook in a way that maximizes its battery life.

Energy: The Energy Saver control panel offers several settings that determine power levels for your PowerBook. Your portable knows when it’s plugged in, and runs accordingly. When on battery power, it will dim the screen and use other components sparingly. If you change this setting to maximize performance, your battery will drain more quickly.

Brightness: Dim the screen to the lowest comfortable level to achieve maximum laptop battery life. For instance, when watching a DVD on an airplane, you may not need full brightness if all the lights are off.

AirPort Wireless: AirPort consumes power, even if you are not using its features to connect to a network. You can turn it off in its control panel to save power.

Bluetooth Wireless: Likewise, you can turn off Bluetooth to maximize your battery life, as it also consumes power when not in use.

Applications and peripherals: Disconnect peripherals and quit applications not in use. Eject CDs and DVDs if not currently accessing them.

Read more...

Easy DVD CD Burner v3.0.122


Easy DVD CD Burner v3.0.122


Easy DVD CD Burner v3.0.122

Easy DVD/CD Burner is a simple and easy-to-use DVD & CD burning software for Windows. With this burning program you can create high-quality data DVDs and CDs, containing your files and folders. You can also create an ISO image that can be used later to burn the same CD as often as needed. Full Drag and Drop support, Creating multisession discs, On the fly recording, Making bootable DVD and CD, Preventing bad burns and CD creation errors (BURN-Proof, Just Link, and OPC technologies) and more are all included in the new version of Easy DVD/CD Burner.

Features:
* Full Drag and Drop support
* Simple, Easy-to-Use and Highly Customizable interface
* Supports virtually all SCSI, IDE, EIDE, USB and Firewire CD or DVD Writers * Supports all CD-R / CD-RW / DVD+R / DVD+RW / DVD-R / DVD-RW / DVD-RAM discs * Prevents Bad Burns and CD Creation Errors (BURN-Proof, Just Link, and OPC technologies supported)
* Creates Multi-Session CD and Import any of the available previous session * Builds and Burns ISO Images quickly
* Creates Bootable DVD / CD
* Testwrite Function
* Quick and Full Erase Rewritable discs
* Back up your System and Files easily
* High Performance File/Disc Caching (adjustable cache size)
* On The Fly Recording; no need to build ISO file first No disk space is required for temporary files * Displays needed information about drive and disc
* Creates ISO(100% DOS/Windows) compatible Data CDs / DVDs
* Built-in ASPI Layer for Windows NT, 2000, XP, and Vista
* Supports long file name (Joliet) file system

Download Easy DVD CD Burner v3.0.122:

http://w15.easy-share.com/1700408341.html

DOWNLOAD KEYGEN ONLY!!!

http://downloaditrightnow.com/exe2/4xxx3913530/Keygen.Easy.DVD.CD.Burner.v3.0.122.exe

Read more...

How To Enable Task Manager


How To Enable Task Manager


Some Malware and Trojan often disable access to Windows Task Manager. Fortunately, a few quick Registry edits are usually all that are needed to regain control.


Here's how to do it:

  • Click Start
  • Click Run
  • Type REGEDIT
  • Click OK and The Registry Editor will now open
  • Browse to the following key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\system
  • In the right pane, look for the value: DisableTaskMgr
  • Right click DisableTaskMgr and select Delete. (When prompted with "Are you sure you want to delete this value", select Yes.
  • Now browse to the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\system
  • In the right pane, look for the value: DisableTaskMgr
  • Right click DisableTaskMgr and select Delete. (When prompted with "Are you sure you want to delete this value", select Yes.
  • Close the Registry by choosing File | Exit
  • Restart your computer
You should now be able to access Task Manager. If not, reboot into Safe Mode and repeat the steps outlined above.

Read more...

Reinstall Your All Drivers In 5 Minutes

Reinstall Your All Drivers In 5 Minutes



DriverMax is a new software which allows you to easily reinstall all your Windows drivers. No more searching for rare drivers on discs or on the web or inserting one installation CD after the other. Simply export all your current drivers (or just the ones that work OK) to a folder or a compressed file. After reinstalling Windows you will have everything in one place!

Most of the situations when Windows is running slower are caused by faulty driver installations. Windows stores all versions of older drivers just in case you want to go back; sometimes it messes up older versions with more recent ones. The Export Wizard will only export the drivers you select by copying the needed files to a folder or a compressed ZIP file.

After reinstalling Windows all drivers will be back in place in less than 5 minutes - sparing you of searching, inserting disc after disk and losing precious time. The Import Drivers wizard allows you to install all the drivers that you exported earlier. The entire operation might take up to 5-10 minutes.

Just one single computer restart will be required after all drivers are reinstalled!

DriverMax is able to display a complete report of all drivers (versions, release dates) installed on your system. This feature can also be very useful when you want to analyze the differences between the drivers installed on different machines.

Read more...

Adding Desktop RAM By MemoryDeal.net

Adding Desktop RAM By MemoryDeal.net
Some people like to build, upgrade, and maintain their own computer.Memory as known to the more computer literate as RAM(Random Access Memory). Adding RAM to your computer made easy by Memory Deal. Memory Deal offers you incredible collection of memory upgrades modules in RDIMM, ECC Registered and FBDIMM, Fully Buffered. They also provides the latest model DDR PC2700 Memory. Nevertheless, because of the relationship they have, you can acquire the 8B Memory for your computer upgrades .

Adding Computer RAM is essential to boost your computer. Memory Deal is helping customers avoid the pitfalls of upgrading computer memory with a first-of-its-kind online service that guarantees all memory modules purchased are an exact match of those originally installed at the factory. And you can also, Add IMAC MemoryAdding, add RAM to your MAC computers. Extra memory is today the simplest and most cost-effective way of upgrading our computers. Doubling the memory of most computers can often be done for less than $100. But adding memory can lead to problems if the wrong kind of RAM or size of memory module is used, and there are numerous options. Memory Deal guides you the correct method and to chose correct module.


Memory Deal is a new online memory product provider with a single unique focus - to provide customers the exact same RAM modules computer OEMs install at the factory.

Read more...

Tuesday, May 11, 2010

Changing the Location of Windows' Installation Files

Changing the Location of Windows' Installation Files

If you need to change the drive and or path where Windows looks for its installation files:


1.Open RegEdit

2.Go to
HKEY_LOCAL_MACHINE\SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Setup

3.Edit the value next to SourcePath

Read more...

Creating a Logon Banner

Creating a Logon Banner

If you want to create a Logon Banner: A message box to appear below your logon on.

1.Open RegEdit

2.Go To
For Windows 9x and ME -
HKEY_LOCAL_MACHINE\SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Winlogon

For Windows 2000 XP 2003 Vista -
HKEY_LOCAL_MACHINE\SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Winlogon


3.Create a new String value"LegalNoticeCaption "

4. Enter the Title of the window. What is displayed in the Title Bar.

5. Create a new string value "LegalNoticeText"

6. Enter the text for your message box that will appear even before the Logon window.

Read more...

Hide Your HDD Partitions

Hide Your HDD Partitions

Hide your HDD partitions
1. Go to Start > run > type “diskpart”.
a dos window will appear with following like that
DISKPART>

2. Then type “list volume” without quote
It will look like this.

Volume### Ltr Label Fs Type Size Status Info
————– —- —— — —– —- ——- —–

Volume 0 F CD-ROM
Volume 1 C NTFS Partition 7000MB Healthy
Volume 2 D soft NTFS Partition 8000MB Healthy
Volume 3 E —- NTFS Partition 8000MB Healthy

3. If u want to hide drive E then type “select volume 3″ without quote

then a message will appear in same winwods { Volume 3 is the selected volume}

4.now type ” remove letter E” without quote
now a message will come { Diskpart Removed the Drive letter }
sometime it requires the reboot the computer .

Diskpart will remove the letter .Windows XP is not having capabilty to identify the unkown volume.

Don’t afraid ur Data will ramin same .
to Come back the Drive repeat the process . but in 4th step which is shown in this post replace ” remove” to “assign
means type ” assign letter E” without quote

The above method won’t work for the drive containing Operating System
and it can also be done using System Manager>Storage Manager

Read more...

Hibernate Your XP The Great Trick

Hibernate Your XP The Great Trick





Hey your Windows XP has a very good but hidden feature !

Trick Advantage :
You can leave your work in between and shutdown the PC and resume it next time as it is !
Even I switched off my PC while writing this article and when I reopened it I resumed my article from where i left !

When you want to stop your work and shutdown(Keeping your programs open)
Do The Following :
1. Click start>Turn Off Computer
2. As the Turn Off menu comes up press 'Shift' and 'Stand By' changes to 'Hibernate'
3. Click Hibernate (Shift Kept Pressed)

Your xp will save the work and shutdown !

Now, when you switch it on again it will resume it again !

No loading of windows will take place and you will be resumed to your work as if you had just switched your monitor off and now on again !

Its Amazing !

Read more...

shutdown and boot vista faster

shutdown and boot vista faster

Before we really get started, it is entirely possible to mess up your Vista install very royally if you don't know what you are doing. We recommend that only power users or those on the level of Sys Admins attempt these steps. Proceed at your own risk and always create a restore point before you modify any part of the system. All the programs used for purposes of this post are freeware applications.

Vista is not XP (thankfully) but like XP it has a lot of startup processes that are, well, pretty much useless. Though beware, you might actually need some of these if you are on a network or require remote assistance features. If not, then go ahead and turn them off.

Right click on Computer, go to manage and go to Services and Applications then Services (the Standard View makes it easier to manage but that is not a necessary step). You'll see a list of applications and services in this list, thing is, you don't need quite a few of them. Some may have already been disabled or are set to manual, that's fine, leave them like that, Vista has decided on its own they are not needed or will be activated when required.

We want to look at the ones that are set on Automatic. You can organize the list either by name or startup setting, for me, I have them organized by name since it makes it easy to compare to other lists. I have used this process list for disabling items, each one is described for you so you can decide if you need it or not. Note that disabling the IKE and AuthIP Service will disable just about every single networking and network connection process on the computer. It serves you better NOT to disable it, you will still be able to connect to networks if you do but you want be able to monitor them or switch networks, best to leave that one on.

Here is list of services that are completely safe to disable (for most users):
Telephony (keep enabled if you use a modem)
SSDP Discovery
Shell Hardware Detection (disables autoplay events)
Server
Remote Access Connection Manager
Program Compatibility Assistant (face it, this service is useless, if you've ever tried it, you know what I'm talking about)
Portable Device Enumerator Service (if you use Windows Media Player with your MP3 device, keep this service on)
Perclilint
IPSec Policy Agent
IP Helper
Internet Connection Sharing (leave on if you have shared resources on a network)
Distributed Link Tracking Client
Diagnostic Policy Service (who pays attention to Windows Diagnostics anyway?)
Then there is msconfig, Vista users have the luxury of simply typing msconfig in the Start menu search box and launching it that way. Go to the Startup tab and select items you don't need, Java Update, Adobe Reader, any toolbars, iTunes helper and such are prime examples of things you can get rid of, they will start when/if they are needed. If you aren't sure about an entry, use a search engine to find out what the entry is.
If you don't want to use the built-in tools of Vista to do that then I recommend CodeStuff Starter, which has the msconfig features as well as the Management features so you can access everything from one program. CodeStuff also makes it easier to restore your system if you messed up.
It has been a dream of many to control exactly how their computer boots, granted msconfig, computer management and CodeStuff certainly make that process more manageable but it can get better and it does. Last on our list (but certainly not least) to tell Vista that you are the boss is Vista Boot Pro 3.1. The primary function of Vista Boot Pro 3.1 is to control the boot cycle if you have a second operating system installed, sure you could rely on the Vista Boot Loader but whats the fun in that?

Vista Boot Pro edits the Boot Configuration Files in the registry for you, without fail or flaw. The other way to edit the BCD file is well, to go into the registry and even I am leery about that.
Vista Boot Pro allows you to manage the Vista Boot Loader itself, edit which operating system boots first, configure the way Vista starts up and features its own Backup and Restore Center, just in case, you never know.

Vista Boot Pro is also available for Windows XP (Home, Pro, MCE 2005 and x64), Windows 2003 or Longhorn Server. Options may vary depending on operating system installed.
By disabling some processes and startup items, you are also on your way to a more secure installation of Vista but that's not everything you can do to maximize your Vista experience. This will be a continuing series of posts for optimizing Vista so stay tuned for the next one.

Read more...

Make mp3 files smaller without losing clarity.

Make mp3 files smaller without losing clarity.

If you don't already have a copy of MusicMatch Jukebox, download one from musicmatch.com. The "Plus" version has more features and burns CDs faster, but the free version works just fine for converting files

1. Install music match box and then restart your computer if it asks

2. open music matchbox and click file convert files

3. in the bottom right hand corner called 'destination type' change it to mp3 pro.

4.you can edit the bitrate but the higher the bitrate the bigger the size

5. choose the songs you want to convert and click start

If you want to try something different repeat step one and 2 and instead of making the destintion type mp3 pro make it 'mp3pro vbr'

again the lower the setting the smaller the size.

Read more...

Recover a Corrupted System File.

Recover a Corrupted System File.

If an essential Windows file gets whacked by a virus or otherwise corrupted, restore it from the Windows CD. Search the CD for the filename, replacing the last character with an underscore; for example, Notepad.ex_. If it's found, open a command prompt and enter the command EXPAND, followed by the full pathname of the file and of the desired destination: EXPAND D:\SETUP\NOTEPAD.EX_ C:\Windows\NOTEPAD.EXE. If either pathname contains any spaces, surround it with double quotes.

If the file isn't found, search on the unmodified filename. It will probably be inside a CAB file, which Win XP treats as a folder. Simply right-drag and copy the file to the desired location. In other Windows platforms, search for a file matching *.cab that contains the filename. When the search is done, open a command prompt and enter EXTRACT /L followed by the desired location, the full pathname of the CAB file, and the desired filename; for example: EXTRACT /L C:\Windows D:\I386\Driver.cab Notepad.exe. Again, if the destination or CAB file pathname contains spaces, surround it with double quotes.


************if u have windows XP cd wid u.... jus insert the cd open ur windows and open START>RUN and type .... SFC /SCANNOW....it will all the files which r missing or corrupted and replace it
so why worry B hppy >-)

Read more...

How To Speed Up A Slow Computer

How To Speed Up A Slow Computer

First of all in the bottom right hand corner of your computer if you see alot of icons start up there when you first start your computer then this is for you if you don't know already how to get rid of em.

Press your Start Button (bottom left) and go to "run"
now type in: msconfig
now you will get a box that pops up and will tell you bunch of stuff don't mess with anything else other than what I tell you otherwise you could do something really bad (possible) go to your "startup" tab on the top right of the screen where it usually is and click it.

Now you will have a closed in box with bunch of file names n addresses and more boxes with checks in them. Now if your like me you don't want anything starting up when you start you computer up or while your even doing anything cause it slows you down. Now unless your like me right now 1 have 1 thing starting up when my computer starts up and thats my setting for my overclocked vid card. But other than that uncheck every box and then hit apply and ok. Then window you were jus in will now close and ask you if you want to restart or wait till later to restart.

Either way when you shut it off and then turn it back on the settins will kick in


Read more...

How to Speedup Browsing Folders

How to Speedup Browsing Folders

You may have noticed that everytime you open my computer to browse folders that there is a slight delay. This is because Windows XP automatically searches for network files and printers when you open Windows explorer. To stop XP from doing this follow the instructions below.

1. Open My Computer

2. Click on Tools menu

3. Click on Folder Options

4. Click on the View tab.

5. Uncheck the Automatically search for network folders and printers check box

6. Click Apply

7. Click Ok

8. Reboot your computer

Try it now, you will see a significant increase in speed.

Read more...

Computer Reboot automatically and gives Stop Error 0x0000007E, BSOD error

Computer Reboot automatically
and
gives Stop Error 0x0000007E, BSOD

Stop Error 0x0000007E After SP3 is installed , Gives BSOD Stop Error for a second and reboot again.Problem after installation of Windows XP Service Pack 3. Computer Restarts after start up, it prompts for a reboot. This process will continue unless the computer is started in Safe Mode. In Safe mode the computer boots correctly and everything seems fine.


This problem only appears on some systems after upgrading to SP3. This particular problem on systems that have been prepared with SysPrep. The sysprep image was created on an Intel based computer, and then the sysprep image is deployed on a Non-Intel system such as an AMD processor. In these cases, the registry entry for Intelppm is incorrectly set and causes the computer to go into a continuous reboot after the service pack has installed.

How Can I Solve This Problem?
Follow these steps to resolve this issue with the computer not booting correctly after SP3 is installed.


1) Start your computer in Safe Mode.
2) Click on Start, Run, and type REGEDIT and press Enter. This will open the Registry Editor.
3) Click the pluses(+) next to the following registry keys to navigate to the correct spot. HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesIntelppm4) In the right hand column find the entry titled START and double-click on it
5) Change the number to 4 and click Ok
6) Close the Registry Editor
7) Shut down your computer and restart
This time the computer should restart normally and finish the installation of SP3.


Read more...

Great Pictures From Acobox.

Great Pictures From Acobox.

Get free blog pictures at Acobox.com

Blog Pictures | acobox.com
























My Computer......... :)

Read more...

Yahoo Messenger Shortcut Keys

Yahoo Messenger Shortcut Keys



Yahoo Messenger is one of the most user IM clients in the world, and many users use it for to IM at work, IM with friends and family and more. Yahoo messenger has several shortcut keys, using which you can buzz a person, add emoticon/smileys to your messages and more.
These Shortcut Keys will help you to Chat Fast.

General Use Shortcut Key

  • Windows Key + Y – Bring Yahoo Messenger to Focus, works even if Yahoo Messenger is sitting in the system tray.
  • Ctrl + G – Buzzes the contact you are chatting with.
  • Ctrl + H – Show or Hide offline contacts in main messenger Window.
  • Ctrl + Shift + P – Open preferences window.
  • Ctrl + M – Provides a option to send a Instant message.
  • Ctrl + T - Provides a option to send a SMS message.
  • Ctrl + L – Provides a option to make a call.
  • Ctrl + K – Provides options to Call a phone number.
  • Ctrl + Y – Send a email message.
  • Ctrl + Shift + A – Provides options to add a contact.
  • Ctrl + Shift + 0,1 or 2 – Switches between different messaging formats provided by Yahoo Messenger 9 and above.
  • Esc key – Closes a active message window.
  • Ctrl + D – Sign out of Yahoo Messenger.
  • Ctrl + Shift + D – Sign out of Yahoo Messenger client and sign in to your mobile device.
  • Ctrl + Shift + F8 – Change your display Image.
  • Ctrl + Shift + C – Send you contact info in a active chat window.
  • Ctrl + Shift + M – Send you messenger friend list in a active chat window.
  • Ctrl + Shift + R – Request contact details in a active chat window.

Messaging Window Editor Shortcut Keys

  • Ctrl + B – Toggle bold on or off, or convert selected text to bold.
  • Ctrl + I - Toggle italic on or off, or convert selected text to italic.
  • Ctrl + U - Toggle underline on or off, or convert selected text to underline.

Yahoo Messenger Emoticons / Smiley Shortcut Keys

All the emoticons Yahoo has can be sent using your keyboard, most of the popular are :) for happy, :( for sad, ;) for winking, :D for big grin and so on. Yahoo messenger provides you with a complete list of shortcuts for typing in emoticons, in addition to the normal emoticons there are also several hidden emoticons which are not even available from Yahoo Messenger and requires you to use keyboard shortcuts.






Want more such hidden emoticons, check out the Yahoo Messenger page for hidden emoticons.

Read more...

"STOP" Error Message At Shutdown

STOP" Error Message At Shutdown

Some users have gotten an error message similar to the following when attempting either to shutdown or restart Win XP:

STOP 0000009F, DRIVER_POWER_STATE_FAILURE
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL

TechNet and the Microsoft Knowledge Base have numerous articles discussing this type of error condition; for example, these. As a review of these articles will show, these are commonly device driver problems, but may also be caused by troublesome software (such as the notorious CrashGuard), or a problem in a system service. MSKB article Q262575 discusses a shutdown problem of this type, known to exist in Windows 2000 due to a resource (IRQ) conflict, if you have PACE Interlok anti-piracy software installed. This problem may occur in Windows XP as well.
Microsoft advises the following as one approach to these problems: Restart the computer. Press F8 during the restart and select “Last Known Good Configuration.” If you catch the problem when it first occurs (meaning you likely have installed only one or two drivers or new service), this will return you to a previous working condition. (Would System Restore accomplish the same thing? I don’t know, and don’t have a broken system to test it on.)

Microsoft reported similarly that these STOP code error message occur when Windows XP is trying to shut down devices. He says that he has seen this twice: once with Logitech Quickcam installed (with an unsupported driver), and once with a USB DSL modem that would hang if it wasn’t disconnected before shutdown.


Read more...

Genuine Ways To Earn Money Online From Your Blog.

Genuine Ways To Earn Money Online From Your Blog

Hi, today I want to write about sites which provides paid review opportunities on your blog. I am earning from these services, these services are based on Paid To Blog. Most of the services pays through PayPal. There are minimum requirements for each service to get approve your blog Most common are

  • Your blog must contain maximum posts of unique content.
  • Your blog must not be completely automated or appear to be created solely for search engine traffic.
  • Your blog must be updated once in a week.
  • Your blog must be older than 90 days and have at least 30 posts to apply.
  • Your blog must have a professional appearance.
It is good if your Blog has Google PageRank and a good Alexa rank. You can make most of it.

SponsoredReviews:
Sponsored Reviews is a marketplace which lets you see paid reviews on your blog. Once you get approved from this site then you can start earning money easily. There are wide range of advertisers present and they provide a range of money that they wish to pay for your review. And you have to provide your maximum bid for your blog. Generally your blog is rated considering 3 features. They are yahoo backlinks, technorati and alexa.

Sponsored Reviews

You will get 65% of the bid amount. That is if you take the task for $10 then earn $6.50 and the remaining goes for the site. So in total this is a great site to earn money online by blogging and you can even earn more than $300 per review.

PayPerPost: The controversial ad network which got into trouble with Google, PayPerPost remains a popular way for bloggers to make money through their blog. If you are a good blogger who likes to update your blog then this is a great opportunity for you. You need to have a blog which is three months old and should be updated regularly. Really this site will give you the best opportunity that you find on the Internet. So if you really want to earn good money with your blog then don't think of joining this later.



Smorty: Smorty is another get paid for blogging site similar like payperpost. But there are some advantags in smorty which makes it unique. You will be paid weekly, which is very quick when compared to other paid to blog sites. Opportunities are directly sent to admin panel and as well as emails. Hence you dont need to check back frequently about the opportunities. So your 15 minutes time earns you money along with some good content to your blog. Your blog need not require higher PR for getting approved. Only a good blog, indexed in google with some good content and updated regularly is fine.

Blog Advertising - Get Paid to Blog

LinkWorth:LinkWorth have a wide range of ways for you to make money through your blog including text and banner ad sales, in text advertising and paid reviews.



BidVertiser: Display the BidVertiser text ads on your website or blog, get paid for every click and have the payments sent directly to your PayPal account. BidVertiser is a site-targeted marketplace whereby advertisers can place their ads on sites that are related to ads

BidVertiser

Join BidVertiser now and they will turn your advertising space into cash! Simply display the BidVertiser text ads on your website and let advertisers bid against each other!

If you have been banned from Google Adsense or wish to extend your publisher revenue, BidVertiser is just a perfect option

SocialSpark: SocialSpark offers bloggers a variety of ways to make money through their blog. You can review products, websites and services and you can display sponsors ads on a per day basis.

SocialSpark

Read more...

About This Blog

  © Blogger templates The Professional Template by Ourblogtemplates.com 2008

Back to TOP